Trabalho de Conclusão de Curso - Graduação

Modelagem geológica e geofísica 2,5-D de estruturas geológicas complexas tipo pré-sal:exemplo sintético

There are areas that present in the subsurface terrestrial complex geological structures (eg. faults, salt domes, dykes, folds, and diabase sills) that reduce the quality of seismic imaging, providing false images as a result of the geological structures under investigation. In rock structures calle...

ver descrição completa

Autor principal: BARBOSA, Ray Diego de Lima
Grau: Trabalho de Conclusão de Curso - Graduação
Publicado em: 2019
Assuntos:
Acesso em linha: http://bdm.ufpa.br/jspui/handle/prefix/1731
id oai:https:--bdm.ufpa.br:8443:prefix-1731
recordtype dspace
spelling oai:https:--bdm.ufpa.br:8443:prefix-17312021-09-17T14:39:41Z Modelagem geológica e geofísica 2,5-D de estruturas geológicas complexas tipo pré-sal:exemplo sintético BARBOSA, Ray Diego de Lima OLIVA, Pedro Andrés Chira http://lattes.cnpq.br/0224399927142671 Indústria Petrolífera Pré-Sal Modelagem 2,5-D Estruturas geológicas complexas CNPQ::CIENCIAS EXATAS E DA TERRA::GEOCIENCIAS::GEOFISICA There are areas that present in the subsurface terrestrial complex geological structures (eg. faults, salt domes, dykes, folds, and diabase sills) that reduce the quality of seismic imaging, providing false images as a result of the geological structures under investigation. In rock structures called pre-salt, where the reservoirs can be found between 5.300me 7000m deep below a thick salt layer that acts as a seal, the modeling and visualization technologies can be used to minimize the risk exploratory oil and gas as well as to check the different topologies of complex structures, construction of maps, cross sections, correlation of wells, channel simulation, geological interpretation, 3D modeling (model stratigraphic model Gear, tanks, basins, surfaces with arbitrary topologies), and so on. In this paper we used the modeling tool 2.5 D with the goal of modeling complex geological structures in the pre-salt. The models were the models structural, stratigraphic, and speed. For the construction of these models were considered geological sections, and seismic (actual data) of sedimentary basins where there are structures present in the pre-salt. In this model there is the presence of a petroleum system understood in this region. These structures may be part of sedimentary basins and be located in areas with adequate structures for hydrocarbon accumulation. Existem áreas na subsuperfície terrestre que apresentam estruturas geológicas complexas (e.g. falhas, domos de sal, diques, dobras, soleiras de diabásio e etc.) que reduzem a qualidade do imageamento sísmico, fornecendo como resultado falsas imagens das estruturas geológicas sob investigação. Nas estruturas rochosas chamadas de pré-sal, onde os reservatórios podem se encontrar entre 5.300m e 7000m de profundidade, abaixo de uma espessa camada de sal que funciona como um selo de vedação, as tecnologias de modelagem e visualização podem ser utilizadas para minimizar o risco exploratório de petróleo e gás, bem como para verificar as diferentes topologias de estruturas complexas, construção de mapas, seções transversais, correlação de poços, simulação de canais, interpretação geológica, modelagem 3D (modelo estratigráfico, modelo de velocidades, reservatórios, bacias sedimentares, superfícies com topologias arbitrárias), e etc. Neste trabalho foi utilizada a ferramenta de modelagem 2,5D com o objetivo de modelar estruturas geológicas complexas na região de pré-sal. Os modelos gerados foram os modelos estrutural, estratigráfico, e de velocidades. Para a construção desses modelos foram consideradas seções geológicas, e sísmicas (dados reais) de bacias sedimentares brasileiras onde existem estruturas presentes na região de pré-sal. Neste modelo destaca-se a presença de um sistema petrolífero compreendido nessa região. Estas estruturas podem fazer parte de bacias sedimentares e estar localizadas em áreas com estruturas adequadas para a acumulação de hidrocarbonetos. 2019-08-29T12:56:56Z 2019-08-29T12:56:56Z 2010 Trabalho de Conclusão de Curso - Graduação BARBOSA, Ray Diego Lima. Modela gem geológica e geofísica 2,5-D de estruturas geológicas complexas tipo pré-sal :exemplo sintético. Orientador: Pedro Chira Oliva. 42 f. Trabalho de Conclusão de Curso (Bacharelado em Geofísica) – Faculdade de Geofísica, Instituto de Geociências, Universidade Federal do Pará, Belém, 2010. Disponível em: http://bdm.ufpa.br/jspui/handle/prefix/1731. Acesso em:. http://bdm.ufpa.br/jspui/handle/prefix/1731 Acesso Aberto 1- CD ROOM
institution Biblioteca Digital de Monografias - UFPA
collection MonografiaUFPA
topic Indústria Petrolífera
Pré-Sal
Modelagem 2,5-D
Estruturas geológicas complexas
CNPQ::CIENCIAS EXATAS E DA TERRA::GEOCIENCIAS::GEOFISICA
spellingShingle Indústria Petrolífera
Pré-Sal
Modelagem 2,5-D
Estruturas geológicas complexas
CNPQ::CIENCIAS EXATAS E DA TERRA::GEOCIENCIAS::GEOFISICA
BARBOSA, Ray Diego de Lima
Modelagem geológica e geofísica 2,5-D de estruturas geológicas complexas tipo pré-sal:exemplo sintético
topic_facet Indústria Petrolífera
Pré-Sal
Modelagem 2,5-D
Estruturas geológicas complexas
CNPQ::CIENCIAS EXATAS E DA TERRA::GEOCIENCIAS::GEOFISICA
description There are areas that present in the subsurface terrestrial complex geological structures (eg. faults, salt domes, dykes, folds, and diabase sills) that reduce the quality of seismic imaging, providing false images as a result of the geological structures under investigation. In rock structures called pre-salt, where the reservoirs can be found between 5.300me 7000m deep below a thick salt layer that acts as a seal, the modeling and visualization technologies can be used to minimize the risk exploratory oil and gas as well as to check the different topologies of complex structures, construction of maps, cross sections, correlation of wells, channel simulation, geological interpretation, 3D modeling (model stratigraphic model Gear, tanks, basins, surfaces with arbitrary topologies), and so on. In this paper we used the modeling tool 2.5 D with the goal of modeling complex geological structures in the pre-salt. The models were the models structural, stratigraphic, and speed. For the construction of these models were considered geological sections, and seismic (actual data) of sedimentary basins where there are structures present in the pre-salt. In this model there is the presence of a petroleum system understood in this region. These structures may be part of sedimentary basins and be located in areas with adequate structures for hydrocarbon accumulation.
author_additional OLIVA, Pedro Andrés Chira
author_additionalStr OLIVA, Pedro Andrés Chira
format Trabalho de Conclusão de Curso - Graduação
author BARBOSA, Ray Diego de Lima
title Modelagem geológica e geofísica 2,5-D de estruturas geológicas complexas tipo pré-sal:exemplo sintético
title_short Modelagem geológica e geofísica 2,5-D de estruturas geológicas complexas tipo pré-sal:exemplo sintético
title_full Modelagem geológica e geofísica 2,5-D de estruturas geológicas complexas tipo pré-sal:exemplo sintético
title_fullStr Modelagem geológica e geofísica 2,5-D de estruturas geológicas complexas tipo pré-sal:exemplo sintético
title_full_unstemmed Modelagem geológica e geofísica 2,5-D de estruturas geológicas complexas tipo pré-sal:exemplo sintético
title_sort modelagem geológica e geofísica 2,5-d de estruturas geológicas complexas tipo pré-sal:exemplo sintético
publishDate 2019
url http://bdm.ufpa.br/jspui/handle/prefix/1731
_version_ 1787154691018194944
score 11.753896